Keep your instruments running efficiently and providing you with the best analytic results. Replacing your tubing often and keeping spares on hand ensures uptime saving time and money. With our wide range of high-quality pump tubing, we have just what you need for your applications.
Sort by
1-25 of 106 Products & Services
This Waste Tubing is designed for use with the PerkinElmer High Throughput System in NexION 1000/2000 series instruments. It is 2 meters in length and has an inner diameter of 1.5 mm.
This Vacuum Pump Port 2 Tubing is used to draw sample solution from the waste valve of the HTS system (Port 2) into the vacuum pump. It's comprised of 2 red polypropylene nuts attached to 1/8'' OD, 1.5 mm I.D. tubing. This tubing is designed for use with the PerkinElmer High Throughput System in NexION 1000/2000 series instruments.
This Internal Standard Port 4 Tubing is used to draw carrier solution from the peristaltic pump tubing into the HTS valve. Comprised of 2 orange polypropylene nuts attached to 1/16'' O.D., 0.75 mm I.D. tubing and a 1/4-28 external fitting. This tubing is designed for use with the PerkinElmer High Throughput System in NexION 1000/2000 series instruments.
This Internal Standard Port 7 Tubing is used to draw internal standard solution from the peristaltic pump tubing into the HTS valve. It's comprised of 2 yellow polypropylene nuts attached to 1/16'' O.D., 0.75 mm I.D. tubing and a 1/4-28 external fitting. This tubing is designed for use with the PerkinElmer High Throughput System in NexION 1000/2000 series instruments.
This Carrier Tubing is used to draw liquid from the carrier standard solvent bottle towards the peristaltic pump tubing. It's comprised of an orange polypropylene nut with a removable CTFE ferrule attached to 1/16'' O.D., 0.75 mm I.D. tubing and a 1/4-28 external fitting. This tubing is designed for use with the PerkinElmer High Throughput System in NexION 1000/2000 series instruments.
This kit is comprised of all necessary tubing required to connect to an HTS system. The system comes standard with a 1 mL loop which is diverse in terms of its use and application. This Tubing and Loop Kit is designed for use in NexION 1000 and 2000 ICP-MS series instruments.
PerkinElmer’s High Throughput System (HTS) affords ultra-fast analysis, dramatically reducing laboratory overheads and the cost of analysis. Using a metal-free fluid path, the system is able to quickly deliver the sample to plasma, while having uncompromised precision and detection limits. This kit contains the sample probe and tubing required allow the uptake of the sample into the plasma.
The TGA 8000 High Performance Hyphenation Tube boosts overall sensitivity of hyphenation systems by a factor of ten. It also helps to keep the TGA outer glass clean for longer instrument life and optimal performance.
This Peristaltic Pump Start-Up Tubing Kit is for use with the MP2 Micro Peristaltic pump. Includes 4 pieces of each tubing.
For use with water and air, not carrier gas.
B44-3 Tygon tubing, sold in 1-foot increments.
This clear Drain Tubing is used for the Plasma 400 ICP-OES series instrument. It is designed for aqueous solutions.
This Solvent Resistant Pump Tubing is for FIAS, FIMS, and the S10 Autosampler. Package contains 12 three-stop tubes.
Sort by
1-1 of 1 Resource Library
