Application Packs and Starter Kits

Torion T-9 Advance Starter Kit, 12 Months

Torion T-9 Basic Starter Kit, 6 Months

Kit includes: Elite-1301 30 M x 0.53 mm x 3.0µm column, Zero Dilution Glass Outer Liner, Zero Dilution Glass Inner Liner, Polyimide uncoated deactivated tubing, 5 M x 0.18 mm, 22 mL headspace vials, 19 mm assembled cap and septa PTFE/silicone and 20 mm electronic crimper (120V).

The PerkinElmer Autosampler Starter Kit contains everything you need to run the Clarus® GC autosampler under one convenient part number.

Includes 1/8 inch fittings.

For use with the 2400 in the CHNmode and with the 2410. pkg. 1

The Tare Weight Set consists of 12 stainless steel, flat body weights, ranging from 1 to 500 mg. Each weight is labeled with its weight value. Weight values meet ASTM 6 Class tolerances. This set also includes a set of forceps. This set can be ordered separately using this part number.

The Standard Stirrup Kit includes two matched stirrups consisting of a hook, stirrup ring, and frame designed to support a sample pan sitting inside the stirrup ring. These stirrups are used with the Provectus 6500 Ultramicrobalance and ship with the Provectus 6500 Installation Kit.

This tube insert is made of pure quartz and meant to be used with the optional oxygen analysis kit for the 2400 Series II CHNS/O Elemental Analyzer.

The best way to assure consistent, accurate results from your PerkinElmer Organic Elemental Analyzer is to use only the highest grade of reagents. Our scientists select the purest raw materials, condition them, then test them on PerkinElmer analyzers. Included in PerkinElmer 2400 Series II Oxygen Analysis Kit P/N N2410513.

The PE 2400 Series II Accessory Kit includes:

• Hydrogen Restrictor
• Spanner Wrench Nut
• Filter Disks, Qty. 12
• O-Ring, 0.421 ID, Qty 12
• O-Ring, 0.859 ID, Qty 4
• Stainless Steel Plug, Qty. 2
• Brass Tubing Union
• Wrench, Double Open-End
• Hex Key Right Angle Wrench, 9/64
• Slow Blo Fuse, 0.5 A, 250 V, Qty. 2
• Slow Blo Fuse, 1 A, 250 V, Qty. 2
• Slow Blo Fuse, 0.375A, 250 V, Qty. 2
• Slow Blo Fuse, 0.75A, 250 V, Qty. 2
• Plastic Gas Line Assembly
• Copper Gas Line Assembly
• Wrench, 1-9/16
• Retrieving Wire
• Furnace Cap, 25 mm
• Furnace Cap, 11 mm
• PE Series II User Manual

The Solid Sample Handling Kit supplies tools designed to manipulate samples to be analyzed using the 2400 CHNS/O Elemental Analyzer.

The FT-IR Nutraceutical Compliance Resource Pack is designed to assist the user in understanding and achieving compliance to pharmacopeia regulatory requirements in FT-IR analysis, using PerkinElmer Spectrum 10 software and PerkinElmer FT-IR instruments.

The Transflectance Liquids Sampling Accessory Starter Kit includes:

• ICRA Liquids Reflectors (L1181105), Qty. 5
• ICRA Petri Dish Bases - 40 mm, Qty. 5
• ICRA Liquid Samples Procedures Disk Kit.
• User Guide

The Liquid and Mull Complete Sampling Kit contains:

• Nujol, 100 mL
• Micro Spatula, 10 cm
• Luer Syringe, 2 mL
• Agate Pestle and Mortar
• Circular Magnetic Film Holder
• MIR Polystyrene Reference Card
• Assorted PTFE Spacer
• Universal Cell Mount
• KBr Rectangular Window, Qty. 2
• KBr Circular Window, Qty. 2
• Custom storage case

The Liquids Sampling Starter Pack contains a Universal Demountable Cell Mount (L1270986), a set of Circular KBr Windows (L1271202), a set of Rectangular KBr Windows (L1271292), a package of 10 mm Round Teflon Spacers (51001137), and a package of Assorted Teflon Spacers (L1270421).

The Ultra-Micro Cell Starter Pack ensures maximum instrument uptime and provides an initial set of cells to jumpstart routine quality liquids UV/Vis analysis. It contains:

• a rectangular cell made of Special Optical Glass (green logo) with a 10 mm path length and a PTFE lid.
• a rectangular cell made of UV Quartz SUPRASIL (blue logo) with a 10 mm path length and a PTFE lid.
• a rectangular ultra-micro cell made of UV Quartz SUPRASIL (blue logo) with a 10 mm path length and a PTFE stopper.
• a Vis-Lamp Complete, a high performance tungsten light source
• a UV-Lamp Complete ELP, a long life deuterium light source with an hours meter

The KBr Disc Starter Pack consists of the Universal KBr Disc Holder (04810949), the Evacuable KBr Pellet Die which forms 13 mm KBr pellets, and the Micro-Disc Holder Accessory (51001144).

The KBr Disc Complete Starter Pack contains a Universal KBr Pellet Holder (04810949), a 13 mm KBr Die Set ((04977043), the 15 Ton KBr Press (51005499), a Micro-Disc Holder Assembly (L1060351), and 100 grams of KBr power.

The Biodiesel Application Pack provides everything needed to analyze biodiesel using infrared spectroscopy sampling techniques according to industry standards, such as EN 14078 and ASTM D6277 This pack is compatible with the Spectrum Two spectrometers.

The FT-IR In-Service Lubricants Application Pack provides everything needed to analyze samples to industry standards, following ASTM and JOAP methodology.

The Gas Sampling Starter Pack contains a Demountable Gas Cell with a 10 cm path length, a volume of 120 ml, and KBr windows. This cell specializes in monitoring air pollutants, studying vapour phase transitions and quantifying impurities in gas samples.

The General Purpose Sampling Kit includes KBr windows and teflon spacers for demountable and semi-demountable cells, a 13 mm KBr Pellet Die, a variety of sample holders, a beam condenser, a pestle and mortar, a variety of sampling tools and preparation materials, as well as standard reference materials.