FT-NIR Accessories

Mid-Infrared (MIR) Polystyrene Traceable Reference Material (TRM) for abscissa calibration is valid for three years. It comes standard in the Mid Infrared IPV Kit (L1250404).

The kit comes with a polystyrene NIST Traceable Reference Material (TRM) that is mounted in a holder specially designed for use with the ATR accessory for abscissa calibration. The material is valid for a period of 18 months from the date shown on the calibration certificate, or sooner if specified by the user's own protocols. It is intended for use with single bounce ATR accessories where the active crystal area can be completely covered by the test sample surface.

PerkinElmer offers a variety of reflectance standards to ensure that Spectrum spectrometers are functioning optimally.

PerkinElmer offers a variety of reflectance standards to ensure that Spectrum spectrometers are functioning optimally.

This calibrated rare earth, oxide-doped, sintered, PTFE polymer disc is 8 mm thick with a 58 mm diameter within a sealable container suitable for NIR abscissa standardization. This standard is suitable for the 60 mm NIRA II spinner L1280410).

This calibrated rare earth, oxide-doped, sintered, PTFE polymer disc is 8 mm thick with a 98 mm diameter within a sealable container suitable for NIR abscissa standardization. This standard is suitable for the 100 mm NIRA II spinner (L1280417).

The Petri Dish with Vented Lid is assembled robotically to reduce the risk of contamination. It measures 90 mm in diameter by 16 mm deep. It is made of transparent polystyrene and has a disposable vented lid. This dish is compatible with the NIRAII/NIRM 100 mm Spinner (L1280417). Qty. 600

The Soda Glass Petri Dish is made of soda-lime glass in the Hydrolytical Class III which means it is resistant to water. It measures 60 mm in diameter and is 15 mm deep. This dish is compatible with the NIRAII/NIRM 60 mm Spinner (L1280410). Qty. 10

The Polystyrene Test Film is 0.038 mm thickness and untraceable.

This calibrated polymer disc is 8 mm thick with a 58 mm diameter. It has a reflectance factor of 99%. It ships in a sealable container compatible with the NIRA II 60 mm spinner (L1280410).

This uncalibrated polymer disc is 8 mm thick with a 58 mm diameter. It has a reflectance factor of 99%. It ships in a sealable container compatible with the NIRA II 60 mm spinner (L1280410).

The Sample Cup is a black, round, metal cup, 50 mm in diameter, and has a quartz glass base. The cup comes threaded on the inside, and it includes a metal lid. When the sample cup is filled, one may analyze dry, ground food or agriculture products. This sample cup may also be used as a check cell after it is sealed.

The PerkinElmer 50% Reflectance Standard 60 mm, Standard is suitable for the NIRA II 60 mm spinner, L1281924

This calibrated polymer disc is 8 mm thick with a 98 mm diameter. It has a reflectance factor of 50%. It ships in a sealable container compatible with the NIRA II 100 mm spinner (L1280417).

The Near-Infrared Performance Validation Upgrade Kit upgrades expired traceable reference materials in the NIR Polystyrene TRM kit (L1180478).

The Transflectance Liquids Sampling Accessory Starter Kit includes:

• ICRA Liquids Reflectors (L1181105), Qty. 5
• ICRA Petri Dish Bases - 40 mm, Qty. 5
• ICRA Liquid Samples Procedures Disk Kit.
• User Guide

PerkinElmer's Mid Infrared Instrument Performance Validation (IPV) kit includes a polystyrene Traceable Reference Material (TRM) for abscissa calibration.