From flow meters and leak detectors to regulators, we have what you need to successfully monitor and manage gas in your laboratory.
Sort by
1-25 of 32 Products & Services
This Dual-Stage High Purity Regulator is used with NexION 2000 ICP-MS series instruments. High-purity brass regulators are designed for use with analytical applications with non-corrosive gases. This regulator features a stainless steel diaphragm and a delivery pressure range of 0-50 psig. Dual Stage regulators will maintain a more constant outlet pressure - even as the pressure in the cylinder declines. So, if your application is one where gas flow is on for long periods, and pressure changes are not desirable - then you should choose a dual stage regulator.
This Dual-Stage High Purity Regulator is used with NexION 2000 ICP-MS series instruments. High-purity brass regulators are designed for use with analytical applications with non-corrosive gases. This regulator features a stainless steel diaphragm and a delivery pressure range of 0-50 psig.
This Dual-Stage Regulator is used with NexION 2000 ICP-MS series instruments. This regulator features a stainless steel diaphragm and barstock, as well as a delivery pressure range of 0-30 psig and CGA 660 fitting.. Dual Stage regulators will maintain a more constant outlet pressure - even as the pressure in the cylinder declines. So, if your application is one where gas flow is on for long periods, and pressure changes are not desirable - then you should choose a dual stage regulator.
For use with the Portable Electronic Gas Leak Detector (N9306089).
The Pneumatic Gas Regulator is a single-stage regulator with a neoprene diaphragm. It can be used to regulate Nitrogen, Helium, Argon, or air. Included is a CGA 590/580 inlet connector and a Swagelok Fitting, 1/4 in. NPT to 1/4 in. Maximum inlet pressure is 3000 PSI.
This Nitrous Oxide Regulator is designed for use with AA instruments and gas cylinders with a CGA 326 connection. It provides pressure control from 350-520 kPA (50-75 psig) and contains an integral thermostatted heater to prevent freezing of the regulator diaphragm.
The Regulator Install Kit makes it possible to set up a single source gas delivery system (instead of using two gas cylinders, one source and one purge gas) by installing a series of gauges off the regulator on the source gas.
Included in the kit are a rotary blower with capacitor and hardware, a vent to be located above the instrument, and an adapter to permit connection of the blower and vent with suitable metal tubing. The adapter and vent are made of stainless steel sheets.
* Notice: Local electrical codes do not permit PerkinElmer Service Engineers to install the blower and vent assembly.
Sort by
1-1 of 1 Resource Library