Precisely control the temperature in your instruments with the most reliable chillers, coolers, and heat exchangers available today.
Proven over several decades and thousands of installations ranging from lasers to analytical equipment, our chillers and coolers are thoroughly tested to provide consistent performance day after day, year after year.
Sort by
1-19 of 19 Products & Services
This Hot Stage Accessory runs on 100-120 V, 60 Hz. The accessory consists of a heating block and a temperature controller that can heat samples up to 230°C in 1°C increments. The hot stage accepts FT-IR cell windows. It attaches to PerkinElmer Spotlight systems via the slide clip on the instrument's sample stage.
The LN2 Cold Finger Accessory is a solid aluminum cylinder, 2.94 inches in diameter with 16 insulated ribs, that is used to maintain sub ambient conditions for coolants from liquid nitrogen to ice water.
The Intracooler Insulated Bolt Kit is a spares kit of intracooler connection parts that link PerkinElmer intracoolers to DSC analyzers. This kit includes an insulating disk, split bushing, and a bolt. This kit ships standard with the PYRIS Cooling Accessory Kit.
The Humidity Generator Calibrated Sensor Assembly is an accessory to the Humidity Generator (N5330400/N5330411). With this part number, you can order a sensor as a replacement or spare.
The PYRIS LN2 Dewar is a stainless steel vessel, 18 inches in diameter, 38 inches high, and about 95 lbs. This dewar has a operating range (under He purge) of -170° to 300°C. This dewar is compatible with the DSC 6000 with Autosampler, DSC 8000, and the Diamond/Jade DSC with Autosampler.
The Liquid Nitrogen Cryo Dewar is a double-walled container through which a coolant, e.g. liquid nitrogen, flows to expand the subambient operating range for the DMA 8000 to temperatures as low as -196°C. This dewar has a 50 L capacity and is optimal for more demanding cryogenic applications. It ships with an Automatic Cryo Kit (N5330259), and installation instructions.
The Automatic Cryo Kit supplies a cryogenic valve that attaches to the AutoCryogenic port on the DMA 8000 analyzer and controls the flow of coolant through a coolant line.
The PYRIS LN2 Feed Tube is a vacuum-jacketed and super-insulated flexible transfer line with a stainless steel braided and welded exterior. It has an outer diameter of 0.125 in, an inner diameter of 0.101 in, and is 6 ft long.
The PYRIS LN2 Feed Tube is a vacuum-jacketed and super-insulated flexible transfer line with a stainless steel braided and welded exterior. It has an outer diameter of 0.125 in, an inner diameter of 0.101 in, and is 3 ft long. This line ships with the PYRIS LN2 Accessory (N5370259).
Sort by
1-1 of 1 Resource Library