We offer a wide range of crimpers and pressing tools for your convenience.
Sort by
1-25 of 30 Products & Services
For use with electronic crimpers and decappers.
The high powered crimper and decapper is an essential laboratory accessory for any high through put environment. Realise the benefits of not only fast and accurate crimping or decapping, but also the ultimate tool in flexibility with interchangeable jaw sets.
Now in a single unit you can crimp and decap standard analytical vials and headspace vials. Changing the jaws, either size or function, takes a matter of just seconds.
The Upper and Lower Anvil Set are parts of the Evacuable Potassium Bromide Die (51001144) which is used to form KBr pellets, a common method for preparing solid samples for FT-IR analysis. This set comes with the Evacuable Die, but it can also be ordered separately as a replacement or spare part.
The Evacuable KBr Die O-Ring ships with the die, but can also be ordered separately as a replacement or spare, using this part number. Qty. 2
The Universal KBr Pellet Holder holds potassium bromide pellets, a widely-used technique for presenting solid samples for infrared analysis. This spring-mounted holder positions KBr pellets in the sample compartment of FT-IR spectrometers. It is required by the 15 Ton Hydraulic KBr Press (51004599), but can be ordered separately with this part number.
The Plunger is a component of the Evacuable Potassium Bromide Die (51001144) which is used to form KBr pellets, a common method for preparing solid samples for FT-IR analysis. It forms 13 mm KBr pellets. The Plunger comes with the Evacuable Die, but it can also be ordered separately as a replacement or spare part.
The Quick Press Spacer Die is a spool-like, stainless steel rod, approximately 7/8 in high with a diameter of 0.875 in. It is a component of the Quick Press and is used to seal large volume stainless steel capsule. Qty. 1
This replacement Crimper Head is a replacement part for the Standard Sample Pan Crimper Press (02190048). With this part number, you can purchase a crimper head as a replacement or spare.
The Sealing Insert for 10µL, 30µL and 50µL Autosampler Sample Pans is one of the interchangeable inserts required by the Universal Crimper Press (B0139005). With this insert, you can crimp hermetically-sealed or volatile pans, such as Autosampler Pans and Covers (B0169319).
The Sealing Insert for Volatile Sample Pans is one of the interchangeable inserts required by the Universal Crimper Press (B0139005). With this insert, you can crimp vented or pierced pans such as Aluminum Pans and Covers (N5190788). Qty. 1
The Sealing Insert for Large Volume Stainless Steel Sample Pans is one of the interchangeable inserts required by the Universal Crimper Press (B0139005). With this insert, you can crimp larger volume pans, such as the Stainless Steel Pans, Covers, and O-rings set (03190218). Qty. 1
Sort by
1-1 of 1 Resource Library