Sort by
1-25 of 94 Products & Services
Rapid testing of your polymer material is refreshingly easy with this out-of-the-box polymer analysis system. A combination of ready-made protocols, a materials library, and the easy-to-use system ensures swift identification of your materials.
The DairyGuard™ Milk Powder Analyzer applies advanced algorithms to screen for known and unknown economic adulterants in milk powder, as well as performing the same fast measurements routinely used for protein, moisture, and fat monitoring today. With the Frontier™ configurable NIR platform, you can expect dependable and consistent operation through years of service.
This Infrared Window for Microscopic FT-IR Analysis is made of potassium bromide crystal, has a diameter of 13 mm and is 2 mm thick. Qty. 1
This Infrared Window for Microscopic FT-IR Analysis is made of sodium chloride crystal, has a diameter of 13 mm and is 2 mm thick. Qty. 1
This Infrared Window for Microscopic FT-IR Analysis is made of barium fluoride crystal, has a diameter of 13 mm and is 1 mm thick. Qty. 1
 60 mm, Calibrated.jpg?width=100&height=100)
The Biodiesel Application Pack provides everything needed to analyze biodiesel using infrared spectroscopy sampling techniques according to industry standards, such as EN 14078 and ASTM D6277 This pack is compatible with the Spectrum Two spectrometers.
A single reflection ATR accessory designed for the analysis of highly absorbing solid, semi-liquid and liquid samples. Easily changeable crystal plate design enables analysis of a broad spectrum of sample types while ensuring constant sampling pathlength.
This Value HATR Accessory is compatible with the Spectrum 3/Frontier spectrometers. Its excellent performance with solids, polymer films, and powders make it an affordable choice for laboratories that need a simple, but effective sampling solution.
The Variable-Angle Reflectance Accessory allows measurement of reflectance spectra at angles of incidence between 15° and 80°. Includes Flat Reference Mirror and three Aperture masks (2 mm, 5 mm, and 10 mm). This accessory is compatible with the Spectrum 3/Frontier spectrometers.
These Base Microscope Slides are uncoated optical quality glass, 1 x 3 in. They are 1 mm thick to allow for visible observations and compatible with PerkinElmer's Spotlight systems. These slides ship standard with the Sampling Accessory Kit (L1860250/L1860435).With this part number, these slides are available for reorder. Qty. 72
This Value HATR Accessory is compatible with the Spectrum 3/Frontier spectrometers. It provides excellent performance with liquids, powders, pastes, and gels, making it an affordable choice for laboratories that need a simple, but effective sampling solutions.
Sort by
1-25 of 34 Resource Library
Cyanoacrylate adhesives also known as ‘superglues’ are single-component reactive adhesives. They cure with the small amount of moisture on the surface of the components and very quickly bond on a variety of substances. FTIR spectroscopy is used extensively within the adhesives industry for research, ...
Silicon wafers are processed by the addition of dielectric films that are used primarily to isolate circuits from each other and to provide mechanical and chemical protection to the device itself. They are also used as masking materials during the wafer fabrication process. There are a variety of di ...
The process of winemaking starts with pressing grapes to must, and fermenting the must to create wine. Once grapes are pressed and must is created, the fermentation process begins. During fermentation, tracking acids associated with the alcoholic and malolactic fermentation processes is crucial to a ...
Biodiesel fuels are often blended compositions of diesel fuel and esterified soybean oils, rapeseed oils, or other potential vegetable oils as well as fats. The physical and combustion properties of these biofuels have allowed them to achieve similar performance to diesel fuel. However, there are se ...
This compendium provides example data and interpretations for the seven codes of recyclable polymers. DSC and TGA raw data files are provided so that the user can easily overlay their data with the expected results for new unprocessed plastics. This allows for a confirmation of identity and assists ...
There are a wide variety of characterization techniques which may be used to identify drugs of abuse, including infrared spectroscopy, Raman spectroscopy, mass spectrometry, gas chromatography, x-ray diffractometry, immunoassays and urine dipstick tests. FT-IR spectroscopy provides one of the best s ...
Advanced instrumentation is key to work in nano-materials. Functional tools such as optical and thermal measurement techniques allow the characterization of materials. As such, they complement imaging tools such as AFM and TEM-SEM which give spatial information on the structure of the materials. Thi ...
Paints and adhesives, although dissimilar materials with different purposes, have a commonality that they are typically liquid phase starting materials that end up as solid materials after a drying or curing period. Attenuated Total Reflectance (ATR) FTIR sampling methods are used extensively within ...
More than 400 chemical products are used in semiconductor plants. There are over 200 liquids and 25 solids. Approximately 170 pure chemical ingredients are used. A third of products contain one of the following ingredients; propylene glycol monomethyl ether acetate (PGMEA), cyclohexanone and propyle ...
Accelerate your research with the modular, multimodal PerkinElmer Hyphenation System, an integrated TGA, IR and GC/MS in a single platform, managed by an electronic control panel, enabling the complete characterization of samples with minimized sample preparation process.
Almost 400 million tons of plastics are produced every year. Unfortunately, this problem is only going to grow because with an estimated mass of 5 billion tons of plastic in landfill and the environment that will break down over time it means the microplastic levels keep rising. A variety of testing ...
As the importance of sustainable energy production increases, so too does the global commitment to using fuels from renewable biological sources. Biodiesel is one such renewable fuel. Consisting of fatty acids of methyl esters (FAME), it is produced from plant crops by transesterification – a reacti ...
Representatives from the Norwegian Institute for Water Research (NIVA) discuss their investigation into the presence of microplastics in the Arctic Ocean. The research area is particularly sensitive to environmental pollution and pressures due to short food chains, and is a region highly reliant on ...
DEF is a colorless liquid which is beneficial in the reduction of nitrogen oxide (NOx) emissions from diesel engines. The Selective Catalytic Reduction (SCR) system injects the DEF through a catalyst, converting the harmful nitrogen oxides into nitrogen, water, and carbon dioxide. Problems can occur ...
Sealants have a wide range of commercial and industrial applications often requiring highly specialized formulations for the different environments they may be used in, such as extreme temperature environments. FTIR (Fourier-Transform Infrared) spectroscopy utilizing the Attenuated Total Reflectance ...
The LQA 300 combines performance, speed, ease of use, uptime, and connectivity – all in a compact instrument. Its intuitive step-by-step workflow analyzes liquid samples and presents results in less than 45 seconds. The LQA 300 is ideal for routine analysis throughout the entire winemaking process. ...
There are ongoing attempts to improve the storage stability of mRNA vaccines by converting them to solid forms using various drying methods. Lyophilization is one such method and has the potential to stabilize mRNA, but there are few reports that describe the interactions of lyophilized mRNA with ex ...
Download this poster for an all-in-one view of how PerkinElmer instrumentation can answer the analytical needs of the solar market. From R&D of nanomaterials and advanced materials to solar cell component testing including aging and defect analysis - our UV/Vis, DSC, TGA, FT-IR and ICP systems help ...
PerkinElmer offers comprehensive and innovative solutions for the identification and quantification of microplastics. Our portfolio includes leading technologies such as the Spectrum Two™ FTIR Spectrophotometer, the Spotlight™ 400 FTIR Imaging System, the NexION® ICP-MS and Hyphenated Technologies. ...
Building specifications for the interior wall finish require the application of a vapor barrier rated primer followed by the normal decorative paint/top coat. Some architects and developers of condominium housing projects have started using a rated vapor barrier primer/paint to replace the tradition ...
Lubrication is a vital component of machinery and, as with any component, early detection of wear is essential for timely replacement, avoiding unnecessary maintenance while reducing the risk of catastrophic breakdowns. Early identification of impending lubricant failure can prevent costly damage. I ...
From fabrication to assembly, wafer design and manufacturing comes with many challenges. The Spectrum 3™ MappIR FT-IR helps ensure quality, reduce fail rates, drive out impurities, and improve wafer production processes to accelerate product innovation and meet customer demands. Whether improving th ...
Milk processors and dairies across the globe are challenged every day with ensuring the consistency of incoming raw materials and making fair payment to suppliers. Quick and accurate compositional analysis of key components of raw milk and other dairy products is of paramount importance in these ind ...
Polymers are used throughout the automotive industry in areas such as the fuel and braking systems, electrical components, and upholstery on the interior of a vehicle. Thermogravimetric analysis coupled with infrared spectroscopy (TG-IR) is a technique which allows users to measure the thermal degra ...
Emulsions are widely used across a variety of industries including agrochemicals, cosmetics and, importantly, pharmaceuticals. In recent years, emulsion-based adjuvants have been developed which have allowed for an improvement in tolerability and immune response to vaccinations. A combination of tec ...