Cells & Windows

To extend the range of samples that you can analyze, we offer a wide range of sample holders.

The light trap aperture kit includes a black glass light trap and iris diaphram especially mounted for use with the General Purpose Optical Bench.

The Single Cell Holder is included with the purchase of the LAMBDA 465. This holder accommodates any standard, rectangular 10 mm cells with the following dimensions: 27.5 x 12.5 x 12.5 mm.

Accommodates any standard 10 mm cells (up to 8 cells). Automated software calibration.

Accommodates any standard 10 mm cells (up to 8 cells), while using recirculating liquid to control the temperature of multi samples for simultaneous analysis. Also comes with automated software calibration.

The magnetic plate precisely positions films and thin samples. The advanced transmission holder is designed to hold materials such as glass, polymers, and films, providing a positive locating point for the sample that can be adjusted to accommodate a range of sizes and thicknesses.The spring-loaded clamp securely holds objects up to 2.5 cm thick.

Designed for measuring specular reflectance spectra at a fixed angle (incident angle: 30° fixed). It is used for film thickness measurement.

An easy to install accessory for rectangular cells of different pathlength. The partition plate allows cells to be supported throughout analysis. It accommodates 5, 10, 20, and 50 mm pathlength cells.

Maintains temperature control over standard 10 mm cells using recirculating liquid.

The Single Cell Holder comes with the LAMBDA 365 instrument and is compatible with all standard 10 mm cell.

This O-Ring is made of viton synthetic rubber, has an inner diameter of 37.82 mm, and a 1.78 mm circumference. It is used on a variety of window accessory kits including CaF₂ (L1390104), KBr (L1600208), ZnSe (L1600258), KBr - Bently (L1600341), and KBR - Delta (L1600370).

This Preassembled Sealed Liquid Cell is a rectangular cell with zinc selenide windows and has a 0.1 mm path length.

The Sample Compartment Window Set is a matched pair of sample compartment windows for the LAMBDA 25/35/45 spectrometers.

This Semi-Demountable Cell Spacer is a rectangular PTFE spacer with a path length of 1 mm. It is used with the Semi- Demountable Cell (L1270986). Qty. 3

The Universal Demountable Cell Mount consists of a top and a back plate. Cell windows, spacers and other componets are added to these plates, allowing you to construct a cell that is tailored to the requirements of the IR experiment.

For Semi-Demountable Cells, order the Universal Demountable Cell and your choice of semi-demountable windows and spacers..

The Universal Gas Cell Holder is required with Spectrum and Frontier accessories, such as the 10 cm Short-Path Demountable Gas Cells (51000634/51000636/51000638).

The Flowcell Window is made of zinc selenide. With this part number, it is available as a replacement or spare set. Qty. 2 windows

This Semi-Demountable Cell Spacer is a rectangular PTFE spacer with a path length of 0.5 mm. It is used with the Semi- Demountable Cell (L1270986). Qty. 3

This Semi-Demountable Cell Spacer is a rectangular PTFE spacer with a path length of 0.2 mm. It is used with the Semi- Demountable Cell (L1270986). Qty. 3

The ZnSe Semi-Demountable Cell Window comes as a set of rectangular windows, one drilled and one undrilled. These windows are made of zinc selenide and have a thickness of 2 mm.

This Semi-Demountable Cell Spacer is a rectangular PTFE spacer with a path length of 0.1 mm. It is used with the Semi- Demountable Cell (L1270986). Qty. 6

This Semi-Demountable Cell Spacer is a rectangular PTFE spacer with a path length of 0.05 mm. It is used with the Semi- Demountable Cell (L1270986). Qty. 6

The NaCl Semi-Demountable Cell Window comes as a set of rectangular windows, one drilled and one undrilled. These windows are made of sodium chloride and have a thickness of 4 mm.

The KRS-5 Demountable Cell Window is a set of rectangular windows (one drilled and one undrilled). Each window has a thickness of 2 mm and is made of thallium bromide-iodide. This material has a broad spectral range and a high refractive index that makes this window ideal for internal reflectance accessories.

Please Note: Thallium bromide-iodide is toxic and should not be polished.

The KBr Semi-Demountable Cell Windowcomes as a set of rectangular windows, one drilled and one undrilled. These windows are made of potassium bromide and have a thickness of 4 mm.