Autosampler Supplies

Tubing for in between the rinse station and the peripump, and from the peripump to the rinse and waste bottles. 1 – 144” Long 5/32” ID 7/32” OD 3 – 16” Long 5/32” ID 7/32” OD

The plexi-glass dust cover for the S25 reduces contamination of the sample from particulate matter, improving the reliability of the analysis, the performance of your S25 Autosampler and ensuring that the laboratory footprint of your autosampler remains the same.

This kit is recommended for use with organic solvents and comes with its own rinse station, allowing the quick change between aqueous and organic analysis. Purchase of this kit with an additional tray for your autosampler N0831037 or N0831038 for the S23 and S25 autosamplers respectively allows for a dedicated organics setup, providing a simple transfer between aqueous and organics samples.

The plexi-glass dust cover for the S23 reduces contamination of the sample from particulate matter, improving the reliability of the analysis, the performance of your S23 Autosampler and ensuring that the laboratory footprint of your autosampler remains the same.

Organic solvent resistant tubing for in between the rinse station and the peripump, and from the peripump to the rinse and waste bottles.

The autosampler has a 3-channel peristaltic pump that accepts below listed tubes when running inorganic acids. 2 – 2 mm ID Pharmx, Black Tabs, Rinse 1 – 3.2mm ID Pharmx, White Tabs, Waste

Probe fitting kit includes:

• 1 – Barb Fitting (Tan)
• 1 – 1/16” Flangeless Fitting (Blue)
• 2 – 1/16” CTFE Ferrules (Clear)

This CTFE Stator is for use with PerkinElmer's High Throughput System (HTS) in NexION 1000/2000 ICP-MS series instruments. It features a 0.75 mm inner diameter.

This PTFE Rotor is for use with PerkinElmer's High Throughput System (HTS) in NexION 1000/2000 ICP-MS series instruments. It features a 0.75 mm inner diameter.

This Waste Tubing is designed for use with the PerkinElmer High Throughput System in NexION 1000/2000 series instruments. It is 2 meters in length and has an inner diameter of 1.5 mm.

PerkinElmer’s High Throughput System (HTS) affords ultra-fast analysis, dramatically reducing laboratory overheads and the cost of analysis. This kit contains two high density polyethylene (HDPE) bottles which were chosen due to the acid-resistant properties and longevity of HDPE. The bottles are used for internal standard and carrier solutions in HTS applications.

This kit is comprised of all necessary tubing required to connect to an HTS system. The system comes standard with a 1 mL loop which is diverse in terms of its use and application. This Tubing and Loop Kit is designed for use in NexION 1000 and 2000 ICP-MS series instruments.

PerkinElmer’s High Throughput System (HTS) affords ultra-fast analysis, dramatically reducing laboratory overheads and the cost of analysis. Using a metal-free fluid path, the system is able to quickly deliver the sample to plasma, while having uncompromised precision and detection limits. This kit contains the sample probe and tubing required allow the uptake of the sample into the plasma.