Sample Introduction Systems

The Near Infrared Reflectance Module for the Spectrum Two N FT-NIR provides a convenient and sensitive method for analyzing opaque or highly scattering solid samples such as pharmaceuticals, food products, soap powders, coal, clay, soil, paper, painted surfaces, polymer foam, and catalysts.

Spectrum Two N Htm - Heatable Transmissi

The Sample Spinner for use with the Near-Infrared Reflectance Module (NIRM) and Near-Infrared Reflectance Accessory (NIRA II) provides representative sampling of non-homogenous samples.

The Sample Spinner for use with the Near-Infrared Reflectance Module (NIRM) and Near-Infrared Reflectance Accessory (NIRA II) provides representative sampling of non-homogenous samples.

The Sample Vial Holder for use with the Near-Infrared Reflectance Module (NIRM) and Near Infrared Reflectance Accessory (NIRA II) securely holds and aligns vials on the accessory window.

Valve two Driver Assembly for Avio 500 MP2 Peripump (includes mounting screws): For upgrading single valve DXi to dual valve DXi for prepFAST

Valve one driver Assembly for Avio 500 MP2 Peripump (includes mounting screws) for upgrading DXi pump module

Used for measuring liquid samples; intended for hazardous samples. Includes N4101048, a transmission dip probe and a 10 mm pathlength tip. Easy to clean.

Used for measuring the diffuse reflectance (SCE) and color analysis for solid and powder samples. It has a spectral range of 270~1000 nm (UV and Visible), and a port size of 10.00 and 5.00 mm (selectable). Included is a Xenon Lamp (150W), and a White Standard (1 each).

Accommodates any standard 10 mm cells; up to 8 samples.

Fiber Optic Probe Module Only for L365. When combined with Fiber Optic Probe it can be used for measuring liquid samples; intended for hazardous samples.

The Ceramic Sample Cup Holder is a sample handling tool that comes standard in the TGA 4000 Non-AutoSampler Accessory Kit (N5200046). This tool can also be used when working with ceramic sample holders and the following analyzers: TGA 6/TGA 4000/STA 6000. Qty. 1

PerkinElmer's High Throughput System (HTS) is a uniquely designed flow injection sample introduction module that integrates seamlessly with the Avio^® series of ICP optical emission spectrometers (ICP-OES) to dramatically reduce sample-to-sample analysis time, thereby improving throughput while maintaining operation simplicity. The HTS maximizes productivity by significantly reducing the time required for the sample uptake, stabilization, and washout.

PerkinElmer’s High Throughput System (HTS) is a novel high-volume sample introduction module for ultrafast trace-metal analysis, dramatically reducing laboratory overheads and cost of analysis. Integrating seamlessly with the NexION^® ICP-MS (1000 and 2000B/C) and Syngistix^™ software, this system delivers up to five times faster sample analysis without compromising detection limits, accuracy or repeatability.

Replacement Fiber Optic Probe and a 10 mm pathlength tip for the N4104012 or N4101013 Fiber Optic Probe Modules.

The O-Ring for the UATR Pressure Arm is made of black nitrile. This O-ring retains its shape and tensile strength under adverse environmental conditions such as heat or immersion in water or oil. With this part number, this o-ring is available as a replacement or spare.

The Spectrum Two Base Plate enables a variety of sampling accessories to interface properly in this spectrometer's sample compartment. With this part number, you can order a replacement or spare plate.

This ATR MIRacle Single Reflection Accessory includes the MIRacle base optics, a zinc selenide (ZnSe) crystal plate, a high pressure clamp with three interchangable tips, purge tubes, and a mount for the Spectrum Two spectrometer.

The Attenuator Disk Accessory includes a disk that has a diameter of 43.5 mm, is 0.05 mm thick, and is made of nickel. It is used to provide additional attenuation when measuring high absorbance materials. With this part number, this disk is available as a replacement or spare.

This Value HATR Trough Top Plate is a stainless steel plate featuring a zinc selenide (ZnSe) crystal. It can be used with the PerkinElmer Value HATR accessories that are compatible with the Spectrum Two and Spectrum 3/Frontier spectrometers.

This Value HATR Flat Top Plate is a stainless steel plate featuring a zinc selenide (ZnSe) crystal. It can be used with the PerkinElmer Value HATR accessories that are compatible with the Spectrum Two and Spectrum 3/Frontier spectrometers.

The Premium HATR Trough Top Plate features a zinc selenide (ZnSe) crystal set at a 45° angle, allowing for simple sampling of liquids, powders, pastes, and gels. It is used with PerkinElmer Premium HATR accessories that are compatible with the Spectrum One/100/400/65 and Spectrum 3/Frontier spectrometers.

The Premium HATR Flat Top Plate features a zinc selenide (ZnSe) crystal set at a 45° angle, allowing for simple sampling of solids, polymer films, and powders. This crystal has a special protective coating to extend its lifetime. It is used with PerkinElmer Premium HATR accessories that are compatible with the Spectrum One/100/400/65 and Spectrum 3/Frontier spectrometers.

The Premium HATR Flat Top Plate features a zinc selenide (ZnSe) crystal set at a 45° angle, allowing for simple sampling of liquids, powders, pastes, and gels. It is used with PerkinElmer Premium HATR accessories that are compatible with the Spectrum One/100/400/65 and Spectrum 3/Frontier spectrometers.

The Premium HATR Flat Top Plate features a zinc selenide (ZnSe) crystal set at a 45° angle, allowing for simple sampling of solids, polymer films, and powders. It is used with PerkinElmer Premium HATR accessories that are compatible with the Spectrum One/100/400/65 and Spectrum 3/Frontier spectrometers.